Dental LED Curing Light 1 Second Built-in Light Meter 2500mWithcm²

Dental LED Curing Light 1 Second Built-in Light Meter 2500mWithcm²
Dental LED Curing Light 1 Second Built-in Light Meter 2500mWithcm²
Dental LED Curing Light 1 Second Built-in Light Meter 2500mWithcm²
Dental LED Curing Light 1 Second Built-in Light Meter 2500mWithcm²
Dental LED Curing Light 1 Second Built-in Light Meter 2500mWithcm²
Dental LED Curing Light 1 Second Built-in Light Meter 2500mWithcm²
Dental LED Curing Light 1 Second Built-in Light Meter 2500mWithcm²
Dental LED Curing Light 1 Second Built-in Light Meter 2500mWithcm²
Dental LED Curing Light 1 Second Built-in Light Meter 2500mWithcm²
Dental LED Curing Light 1 Second Built-in Light Meter 2500mWithcm²
Dental LED Curing Light 1 Second Built-in Light Meter 2500mWithcm²

Dental LED Curing Light 1 Second Built-in Light Meter 2500mWithcm²
Product Name: LED Curing Light. Intended use site: Hospital or professional medical site. Light source: High-power blue light LED. Wave length: 385nm to 515nm. Power source: Rechargeable Lithium battery, 3.7V/ 2200mAh. Charger: Power Input: 100V to 240V. Input Power: 10VA; Power Output: DC5V/1A. The device is not provided sterile and is not intended to be sterilized when used.

To prevent cross contamination, users must cover the device with FDA cleared barrier sheath before use. It should be changed between each patient.

Press the S button, following four modes are available: Normal Mode: screen show P1. Press the S button to select of time which could be 5, 10, 15, 20 seconds. Pulse Mode: screen show P2. Strong Mode: screen shows P3. Press the S button to select of time which could be 1. During the operation, aim the top of the main unit, at the correct position, press the ON/OFF button and the main unit will produce "Bi" sound. The curing light radiates blue light and starts working according to the set modes mean while.

During operation, the blue light can be stopped by press the power button at any time. After a working cycle, operator can press the ON/OFF switch to start another working cycle. Stop operating if the equipment began to heat obviously, do not restart until the equipment cool down.

Suggest continues working cycle less than 10 times. Low power detective circuit is fixed inside of the main unit when low power is detected, the display screen of main unit will wink, please charge in time. This equipment will turn off automatically if there is no any action within 2 minutes; You can turn it on by press any button. The depth of solidification of composite is no less than 4mm per 10 second.

FDA Statement: The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatry agencies. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Handpieces & Instruments\Other Handpieces & Instruments". The seller is "2013eshop01" and is located in this country: CN.

This item can be shipped worldwide.


Dental LED Curing Light 1 Second Built-in Light Meter 2500mWithcm²